How to Fix Existing Wrinkles or Bubbles

The appropriate repair depends on the severity and cause.

Minor Surface Wrinkles

If the wrinkle is small and there is no seam failure:

1. Wait for moderate temperatures.
2. Allow the turf to relax.
3. Gently brush the fibers.
4. Inspect the backing and edges.
5. Check whether the wrinkle disappears after temperature stabilization.

Avoid aggressively pulling the turf during extreme heat.

---

Localized Bubbles

For a persistent localized bubble:

1. Identify the direction of movement.
2. Check whether the seam or edge has released.
3. Lift the affected section if necessary.
4. Remove failed adhesive or debris.
5. Allow the turf to relax.
6. Reposition without excessive tension.
7. Rebond the affected area using the manufacturer’s recommended adhesive system.
8. Apply appropriate pressure during curing.

If the backing itself has permanently deformed, simple brushing or repositioning may not be sufficient.

---

Large-Scale or Repeated Wrinkling

If wrinkles repeatedly appear across a large area, do not simply keep pulling the turf flat.

The underlying cause should be investigated.

Possible causes include:

• Incorrect installation tension
• Insufficient substrate preparation
• Poor backing dimensional stability
• Improper seam construction
• Excessive perimeter restraint
• Moisture beneath the turf
• Thermal movement beyond the installation design
• Incorrect adhesive selection

In these cases, partial or complete reinstallation may be more appropriate than repeated cosmetic repairs.