Artificial turf is designed as a complete system rather than just a layer of synthetic grass fibers. The three main components—backing, yarn, and infill—work together to create a stable, durable, and natural-looking surface.
The infill is the final component added after installation. These small granules are brushed between the fibers to support the blades, add weight, improve surface stability, and enhance comfort underfoot. Without sufficient infill, even high-quality artificial turf may flatten, move, or lose its natural appearance over time.
The correct infill type and depth help maintain fiber recovery, drainage performance, and long-term durability.
Common Mistakes When Spreading Turf Infill and How to Avoid Them
Mistake 1: Brushing When the Grass is Wet or Too Hot.
Wet turf causes infill granules to stick to upper blades instead of reaching the backing, creating clumping. Brushing under extreme heat can distort softened grass fibers.
Mistake 2: Using Too Little or Too Much Infill
Misjudging quantity is the most frequent error. Too little infill leaves fibers unsupported, so the surface stays flat and shifts underfoot. Too much compresses the blades, cuts cushioning, and slows drainage. Avoid both by calculating the required volume before you start, referring to the manufacturer’s rate for your pile height and density, and measuring or weighing the material rather than eyeballing it. A mechanical spreader keeps your application rate consistent and close to target.
Leave a Reply