Category: artificialgrassvip

  • How Should Non-Infill Turf Be Installed to Reduce Wrinkling?

    Installation is often more important than consumers expect. Step 1: Inspect the Substrate Before installation: For outdoor applications, drainage should be designed according to the site and local construction requirements. A turf surface cannot compensate for a poorly constructed substrate. Step 2: Allow the Turf to Relax Artificial turf is commonly supplied in rolls. After…

  • What Drainage Parameters Are Appropriate for European and American Projects?

    Rather than converting a Chinese product specification directly into a supposedly universal “European standard,” projects in Europe and North America should use the applicable regional standard and project specification. For European sports facilities, relevant standards can include applicable EN requirements and national specifications. Germany’s current DIN 18035-7:2026-04, Sports grounds – Part 7: Synthetic turf areas, is the…

  • How Long Does Non-Infill Artificial Turf Take to Dry After Rain?

    After rainfall, non-infill artificial turf can often drain surface water relatively quickly, but there is no universal drying time that applies to every installation. The time required depends on the turf’s permeability, backing design, foundation, surface gradient, drainage infrastructure, rainfall intensity, temperature, humidity and wind conditions. For a properly designed outdoor installation, light rain followed by…

  • How Turf Construction Affects Artificial Turf Lifespan?

    Raw Material Quality and Polymer Formulation The quality of the polymers used to produce artificial turf has a direct effect on fiber strength, flexibility, and aging resistance. Premium turf is typically made with carefully formulated virgin polymers or other high-quality polymer blends to provide more consistent long-term performance. Lower-cost products may use different polymer formulations…

  • Step-by-Step Artificial Turf Installation Process

    After the sub-base is compacted, apply a final leveling layer of sharp sand or stone dust to create a smooth surface for the turf. Spread it to a depth of about half an inch and screed it flat with a straight board. Check for low spots, fill them, and re-screed until the surface reads level.…

  • How Much Infill for Synthetic Grass Do You Need?

    Calculating Infill Volume: Formula and Factors How much infill your project needs depends on three main variables: the pile height (blade length), the turf density, and the infill material itself, since sand, rubber, and TPE all have different weights and settling behavior. As a general benchmark, many turf manufacturers recommend starting around 0.5 to 1.5…

  • Brush the Turf to Settle the Infill

    Brushing drives granules down to the base structure and restores fiber memory. Artificial grass fibers naturally lay in one direction. Always brush against the grain (fiber direction) to lift the blades and guide the granules deep down to the backing. Cross-Pattern Finish: After brushing against the grain, sweep with the grain and finish in a cross-pattern so every…

  • Critical Benefits of Quality Synthetic Turf Infill

    Turf infill performs several important functions. It keeps the fibers upright, preventing matting and preserving a natural appearance. It adds cushioning underfoot, making the surface more comfortable for walking, play, and pets. It acts as ballast, stabilizing the mat and reducing wrinkles and shifting over time. And it supports drainage by creating consistent pathways for…

  • How to Spread Infill on Artificial Turf

    Installing artificial turf does not end when the grass is rolled out and secured. The final step—spreading infill correctly—determines whether your artificial lawn stays upright, stable, and natural-looking for years. 01Quick Answer To spread infill on artificial turf, first brush the fibers upright, then apply infill evenly using a drop or broadcast spreader. Spread the…

  • Padel Court – Frequently Asked Questions – FAQ

    1. What’s the size of a padel court? Answer: A padel court is 20m long by 10m wide. End/corner walls are 4 meters and side walls 3 meters. A padel court requires at least 11×21 meters, plus an extra 0.5 meters on each side. 2. What’s the difference between tennis and padel courts? Answer: Padel courts are…