After the sub-base is compacted, apply a final leveling layer of sharp sand or stone dust to create a smooth surface for the turf. Spread it to a depth of about half an inch and screed it flat with a straight board. Check for low spots, fill them, and re-screed until the surface reads level. This top layer also helps the turf fibers settle and lock in place once installed. Before unrolling the grass, let it relax in the sun—blades facing down—for at least an hour or two so it lies flat without memory creases.
Step-by-Step Artificial Turf Installation Process
With the dirt base compacted and leveled, the project moves from foundation to finish. Each of these steps builds on the preparation work, and a little patience here is what produces a seamless, natural-looking surface.
Roll Out and Cut Artificial Turf to Fit Your Area
Unroll the turf across the prepared base and let it rest briefly so creases and wrinkles settle out. Using a sharp utility knife, trim the turf to the exact shape of your area, cutting along the backing rather than through the blades. It is smart to cut slightly oversize first, then make small final trims for a snug fit around edges, curves, and obstacles. Keep blade direction consistent across pieces so the finished lawn looks uniform under sunlight.
Leave a Reply