Installing artificial grass on dirt requires more than simply rolling out turf. Because soil shifts, holds moisture, and allows weeds to grow, a properly compacted base is essential for drainage, stability, and a long-lasting lawn.
Installing Artificial Turf on Soil in 5 Steps
- Excavate the top three to four inches of sod and soil, removing weeds, roots, and large debris.
- Lay a permeable weed barrier over the graded soil before adding the aggregate base.
- Add and compact a sub-base of crushed stone or decomposed granite, working in thin layers with a plate compactor to support the turf and aid drainage.
- Level the surface with a thin layer of sharp sand or stone dust, then check for low spots.
- Roll out, cut, seam, and secure the turf, then brush the fibers upright and apply infill.
Do not lay artificial grass directly on dirt. Direct contact prevents proper drainage and produces a lumpy, uneven surface that fails quickly.
Pre-Installation Planning
Before starting excavation, spend a few minutes planning your artificial grass installation. Proper preparation helps reduce waste, avoid visible seams, and prevent drainage problems later.
Measure the Area and Estimate Materials
Measure the length and width of your yard to calculate the required turf area. Add around 5–10% extra material for trimming, curves, and installation adjustments. Planning the layout in advance also helps minimize unnecessary seams.
Leave a Reply